Filter
Top Products
CC100 Master Bridge User’s Guide
45
[-c <lan1/lan2/off/del>] addresses can be setup, refer Static MAC
<mac>: max 8 entries
<lan1/lan2>: bind the current MAC entry to LAN1 or LAN2 port,
i.e. enable this MAC entry as static MAC
<off>:disable this MAC entry, neither bind to LAN1 nor LAN2
<del>: remove the current MAC entry, invalid this MAC entry to
default 00-00-00-00-00-00
swtagvlan
[-c <on/off>]
[-p <lan1/lan2/hpna>
[-r <priority(0~7)>]
[-v <vid(0~4095)>]
[-i <all/tag>]
[-o <untag/
tag/
bypass >]]
Display or set up the LAN1/LAN2/HCNA Tag VLAN. refer
Tag
VLAN Setup for more.
<lan1/lan2/hpna>: configure LAN1 or LAN2 or HCNA port
<priority>: 802.1p value, 0~7
<vid>: 802.1Q VID, 0~4096
<all/tag>: ingress rule -- accept all incoming packets or accept
incoming tagged packets only, reject other incoming packets.
<untag/tag/bypass>: egress rule: un-tag or tag or bypass the
outgoing packet
-c: enable Tag VLAN mode or not
-p: the port in Tag VLAN mode
-r: 802.1p in Tag VLAN mode
-v: VID of 802.1Q in Tag VLAN mode
-I: ingress rule for the port in Tag VLAN mode
-o: egress rule for the port in Tag VLAN mod
tftp
-s <ip>
-c <get/put>
-f <file>
Run TFTP client to get file (upload file onto CC100) or to put
file (retrieve file from CC100) from TFTP server IP <ip>.
<get/put>: run TFTP command ‘get’ or ‘put’
<file>: filename
time
Display current System Time.
upep
[-a]
[-m <mac>]
[-n <note>]
Upgrade EP HCNA driver (stored in Upload Area), this
operation also synchronize EP with EP
Properties Profile
stored in CC100,
-a: upgrade all on-line EP at once
-m: upgrade the EP with matched MAC <mac>
-n: upgrade (matched MAC <mac>) EP ‘Note’ property <note>
upmaster
Upgrade Master HCNA driver (stored in Upload Area), this
operation also synchronize Master HCNA device with its setting
values in
Properties Profile.
upsys
Upgrade the uploaded system firmware (stored in Upload
Area), then reboot.
useradd
name
-p <password>
-r <ro/rw>
Create new management user account.
name: user name
-p: login password
-r: ‘ro’ for user has read-only privilege, ‘rw’ for user has read-
write privilege
userdel
name Delete the management user account by name.
name: user name
users
Display all user accounts.