26 Chapter 1 Installing the Nortel VPN Router 2750 chassis
NN46110-318 02.01
Figure 1 shows the front view of the Nortel VPN Router 2750.
Figure 1 Front view of the Nortel VPN Router 2750
The VPN Router 2750 chassis provides the following:
• two 10/100 Ethernet local area network (LAN) ports on the base system
• one serial port for out-of-band management of the VPN Router 2750
• four expansion peripheral component interconnect (PCI) slots that can contain
optional interface cards, a VPN Router Security Accelerator card, and the
Secure Sockets Layer (SSL) VPN Module 1000
• a memory of 256 MB that is upgradable to 512 MB total
Preparing to install the Nortel VPN Router 2750
Before you begin the installation, verify that:
• Your shipment is complete and undamaged.
• You have the cables, tools, and other equipment that you need.
• Your installation site meets the physical, electrical, and environmental
requirements.
The sections that follow provide information to help you prepare for installation.
CS260001D
Alert
Boot/Ready
VPN Router 2750