Filter
Top Products
53
Nortel VPN Router Installation — VPN Router 2750
Chapter 3
Configuring the management IP interface
This chapter describes how to configure a management Internet Protocol (IP)
address, subnet mask, and default gateway address on a newly installed VPN
Router 2750. After you complete the procedures in this chapter, you can configure
and manage the VPN Router 2750 using a Web browser from a PC.
To configure the management IP interface, you use the serial interface
configuration menu. You must connect a PC or terminal to the serial port on the
VPN Router 2750.
This chapter contains the following topics:
Topic Page
Required information 54
Configuring the management IP address 55
Testing the configuration 59
Troubleshooting 60