Nortel Networks 2750 Network Card User Manual


 
60 Chapter 3 Configuring the management IP interface
NN46110-318 02.01
Troubleshooting
If you cannot connect to the VPN Router 2750 using your browser, check the
following items:
Ensure that you entered the correct IP address in the browser window.
Type a known URL in the browser window to ensure that your network
connection is good.
Check that the management IP address that you configured is on the same
subnet as the physical LAN attached to the gateway.
Ensure that your PC is running a supported browser (see“Testing the
configuration” on page 59).
Check the physical connections on the VPN Router 2750, especially the LAN
cables and the power cord.
If you still cannot connect to the VPN Router 2750 using a browser, connect a
terminal or PC to the gateway with the serial cable and check the management IP
address listed in the serial menu (see “Configuring the management IP address”
on page 55). Reconfigure the management IP address if necessary.
If you cannot resolve the problem, contact the Nortel Technical Solutions Center
closest to you (see “How to get help” on page 17).