Filter
Top Products
32 Chapter 1 Installing the Nortel VPN Router 2750 chassis
NN46110-318 02.01
Mounting the chassis in the equipment rack
Nortel recommends that two people install the chassis in the rack.
To install the VPN Router 2750 in the equipment rack:
1 Set the VPN Router 2750 on the rack-mount shelf.
2 Remove the front bezel from the VPN Router 2750 (Figure 5).
a Use the Phillips screwdriver to turn each of the two screws on the front
bezel a quarter turn counterclockwise.
Figure 5 Removing the front bezel
b Grip the two handles, and firmly pull the bezel toward you to unsnap it
from the chassis.
The first several times that you remove the front bezel, the bezel can stick
because the ball studs and socket clips are new.
Caution: Risk of equipment damage
Do not use the piece with the Nortel logo and the LEDs as a handle.
CS260015E