Filter
Top Products
Chapter 2 Cabling the VPN Router and turning the power on 37
Nortel VPN Router Installation — VPN Router 2750
Figure 7 shows the back of the VPN Router 2750. All interface cables and the
power cord attach to the rear of the gateway.
Figure 7 Rear view of the Nortel VPN Router 2750
Connect the interface cables to the VPN Router 2750 in this order:
1 Connect the 10/100BASE-X RJ-45 cables to the built-in 10/100BASE-X
Ethernet LAN ports on the gateway (Figure 7).
2 Connect the serial cable shipped with the VPN Router 2750 to the serial port
(Figure 7), if you plan to connect a terminal or PC to the gateway.
3 Connect all other cables to the ports on the installed interface cards.
If you ordered optional interface cards, connect the cables for these interfaces
to the ports.
Connecting the power cord
You must order the power cord for the VPN Router 2750 separately.
Caution: Risk of equipment damage
Do not modify or use the AC power cord if it is not the exact type that is
required for your power outlet.
Serial Port
LAN0 LAN1
100 - 240 V~
5 - 3 A
60 - 50 Hz
Power
VPN Router 2750
1234
11424EA
4 PCI slots
10/100
Ethernet
LAN ports
Serial portAC
receptacle
Power
switch