Nortel Networks 2750 Network Card User Manual


 
80 Appendix A Technical specifications
NN46110-318 02.01
Figure 28 Serial cable (9-pin D-sub plug to RS-232-C modem plug)
Table 20 provides the multiple DB9/DB25 serial interface cable pinouts.
Modem cable specifications
If you need to connect a modem to a VPN Router 2750, you must obtain an
appropriate modem cable. The modem cable must have a 9-pin D-sub plug that
connects to the VPN Router 2750 serial port and a 25-pin D-sub plug that
connects to the RS-232-C modem port (Figure 29 on page 81).
Table 20 Multiple DB9 and DB25 connector pinouts
Serial port
DB9 connector
Serial port
DB25 connector
Serial port
DB25 connector
Serial port
DB9 connector
Pinout Signal Pinout Signal Pinout Signal Pinout Signal
2RXD3TXD>2RXD3TXD
3TXD2RXD>3TXD2RXD
4DTR20DSR>6DTR6DSR
5 Ground 7 Ground > 7 Ground 5 Ground
6DSR6DTR>20DSR4DTR
7RTS4RTS>5CTS8CTS
8CTS5CTS>4RTS7RTS
Pin 1Pin 5
Pin 6Pin 9
10 ft
(3.05 m)
9-position D-sub receptacle with screw locks
(ground shield connected to backshell)
CAB0056A
Pin 13
Pin 1
Pin 25
Pin 14
25-position D-sub plug with screw locks
(ground shield connected to backshell)