Filter
Top Products
Chapter 2 Cabling the VPN Router and turning the power on 41
Nortel VPN Router Installation — VPN Router 2750
LEDs on the system 10/100BASE-TX Ethernet ports
Each of the two 10/100BASE-TX Ethernet ports on the rear of the VPN Router
2750 has two LEDs (Figure 9).
Figure 9 LEDs on the system 10/100BASE-TX Ethernet ports
Table 5 describes the LEDs on the system 10/100BASE-TX Ethernet ports.
Table 5 LED indicators on the system 10/100BASE-TX Ethernet ports
LED Indicator Description
Green On The LAN port is operating at 100 Mb/s.
Off The LAN port is operating at 10 Mb/s.
Yellow On The cable connections between the LAN port and the
hub are good.
Off The cable connections between the LAN port and the
hub are faulty.
Flashing The LAN port is sending or receiving network data.
The frequency of the flashes increases with
increased traffic.
CS260011A
Green
Yellow