Filter
Top Products
Alteon OS Command Reference
The Configuration Menu
24543W7774, May 2007
/cfg/l2/vlan/pvlan <protocol number>
Protocol-based VLAN Configuration
Use this menu to configure Protocol-based VLAN (PVLAN) for the selected VLAN.
[VLAN 1 Protocol 1 Menu]
pty - Set protocol type
prio - Set priority to protocol
add - Add port to PVLAN
rem - Remove port from PVLAN
del - Delete protocol
ena - Enable protocol
dis - Disable protocol
ports - Add/Remove a list of ports to/from PVLAN
tagpvl - Enable/Disable port tagging for PVLAN
taglist - Enable tagging a port list for PVLAN
cur - Display current PVLAN configuration
Table 6-51 PVLAN Menu Options (/cfg/l2/vlan/pvlan)
Command Syntax and Usage
pty <(Ether2|SNAP|LLC)> <Ethernet type>
Configures the frame type and the Ethernet type for the selected protocol. Ethernet type consists of
a 4-digit (16 bit) hex code, such as 0080 (IPv4).
prio <0-7>
Configures the priority value for this PVLAN.
add
Adds a port to the selected PVLAN.
rem
Removes a port from the selected PVLAN.
del
Deletes the selected protocol configuration from the VLAN.
ena
Enables the selected protocol on the VLAN.
dis
Disables the selected protocol on the VLAN.
ports
Defines a list of ports that belong to the selected protocol on this VLAN. Enter 0 (zero) to remove
all ports.