Filter
Top Products
Alteon OS Command Reference
The Configuration Menu
29343W7774, May 2007
/cfg/l3/bootp
Bootstrap Protocol Relay Configuration
The Bootstrap Protocol (BOOTP) Relay Menu is used to allow hosts to obtain their configura-
tions from a Dynamic Host Configuration Protocol (DHCP) server. The BOOTP configuration
enables the switch to forward a client request for an IP address to two DHCP/BOOTP servers
with IP addresses that have been configured on the
GbE Switch Module.
BOOTP relay is turned off by default.
[Bootstrap Protocol Relay Menu]
addr - Set IP address of BOOTP server
addr2 - Set IP address of second BOOTP server
on - Globally turn BOOTP relay ON
off - Globally turn BOOTP relay OFF
cur - Display current BOOTP relay configuration
Table 6-90 Bootstrap Protocol Relay Configuration Menu Options (/cfg/l3/bootp)
Command Syntax and Usage
addr <IP address (such as 192.4.17.101)>
Sets the IP address of the BOOTP server.
addr2 <IP address (such a 192.4.17.101)>
Sets the IP address of the second BOOTP server.
on
Globally turns on BOOTP relay.
off
Globally turns off BOOTP relay.
cur
Displays the current BOOTP relay configuration.