Filter
Top Products
Alteon OS Command Reference
First-Time Configuration
3743W7774, May 2007
3. Configure Gigabit Ethernet port autonegotiation mode.
If you selected a port that has a Gigabit Ethernet connector, the system prompts:
Enter on to enable port autonegotiation, off to disable it, or press <Enter> to keep the current
setting.
4. If configuring VLANs, enable or disable VLAN tagging for the port.
If you have selected to configure VLANs back in Part 1, the system prompts:
Enter
d to disable VLAN tagging for the port or enter e to enable VLAN tagging for the port.
To keep the current setting, press <Enter>.
5. The system prompts you to configure the next port:
When you are through configuring ports, press <Enter> without specifying any port. Other-
wise, repeat the steps in this section.
Port Auto Negotiation:
Current Port EXT1 autonegotiation: on
Enter new value ["on"/"off"]:
Port VLAN tagging config (tagged port can be a member of multiple VLANs)
Current TAG support: disabled
Enter new TAG support [d/e]:
Enter port (INT1-14, MGT, EXT1-4):