Filter
Top Products
Alteon OS Command Reference
The Configuration Menu
28543W7774, May 2007
/cfg/l3/igmp/relay
IGMP Relay Configuration
Table 6-83 describes the commands used to configure IGMP Relay.
dis
Disables IGMP version 3.
cur
Displays the current IGMP version 3 configuration.
[IGMP Relay Menu]
mrtr - Upstream Multicast Router Menu
add - Add VLAN(s) to downstream
rem - Remove VLAN(s) from downstream
clear - Remove all VLAN(s) from downstream
report - Set unsolicited report interval
ena - Enable IGMP Relay
dis - Disable IGMP Relay
cur - Display current IGMP Relay configuration
Table 6-82 IGMP Relay Menu Options (/cfg/l3/igmp/relay)
Command Syntax and Usage
mrtr <multicast router number (1-2)>
Displays the Upstream Multicast Router Menu. To view menu options, see page 286.
add <VLAN number (1-4094)>
Adds the VLAN to the list of IGMP Relay VLANs.
rem <VLAN number (1-4094)>
Removes the VLAN from the list of IGMP Relay VLANs.
clear
Removes all VLANs from the list of IGMP Relay VLANs.
report <0-150>
Configures the interval between unsolicited Join reports sent by the switch, in seconds.
The default value is 10.
ena
Enables IGMP Relay.
Table 6-81 IGMP V3 Menu Options (/cfg/l3/igmp/snoop/igmpv3)
Command Syntax and Usage