Filter
Top Products
Chapter 4 Configurator Procedure for Creating a Node Profile
37
Getting Started with Passport 4400, Release 4.1
Defining a Customer ID
To Define a Customer ID:
1
Enter the customer ID in the Customer ID field. Enter an integer between 1
and 65535 (for example, 9265).
2
After you have completed modifying your parameters, click Save. A
Command Successful message appears.
3
You must reset the system before the new configuration takes effect.
Continue below.
Resetting the Unit
1
Click on Administration.
2
Click on System Reset. The System Reset window opens:
In the Reset Type field, use the pull down menu to select Configuration. Click
Reset. A unit reset confirmation message is displayed.