Filter
Top Products
48
Chapter 5 Accessing the CLI and Basic Configuration
209664-A
5
Use the following CLI command to assign the IP address:
CLI> add ip address entry
Example:
CLI> add ip address entry 3 192.168.22.22 255.255.0.0 192.168.255.255
6
Save the configuration and reset the unit.
CLI> save configuration update
CLI> reset system current reset
Parameter Range of Values Required Actions
<IfIndex> INTEGER (1..255) Enter the IfIndex of the Interface
displayed in Step .
<IPAddress> IPAddress Enter the IP address you want to
assign the Passport 4460.
<NetMask> Sub-NetMask
(255.255.255.0,
255.255.0.0, or
255.0.0.0)
Enter the subnet mask. The bits of the
subnet mask are set to 1 if the
Passport 4460 should treat the
corresponding bit in the IP address as
part of the IP network prefix.
<BcastAddress> IPAddress The IP address used for broadcasting.