Filter
Top Products
Chapter 5 Accessing the CLI and Basic Configuration
47
Getting Started with Passport 4400, Release 4.1
Assigning the IP Address
Passport 4460 units are shipped with a default IP address of 192.168.200.200. You
need to change the IP address to match the configuration of your network.
To display the Passport 4460’s IfIndexes, type in the following command:
CLI> show ip address operational table
The following display is shown:
IfIndex : 1
IPAddress : 199.30.20.77
Mtu : 1500
DataLinkType : ether
KeepAlive : on
ForwardBcast : off
IPNumber : numbered
RouteProtocolType : disable
IfIndex : 2
IPAddress : 199.168.25.24
Mtu : 1500
DataLinkType : fr
KeepAlive : off
ForwardBcast : off
IPNumber : numbered
RouteProtocolType : rip
IfIndex : 32
IPAddress : 199.168.200.200
Mtu : 1500
Note:
The name for the base module is always base; Expansion modules
are named exp1, exp2; the PCMCIA module is named pcmciaExp.