Filter
Top Products
130 Digital Telephone IP Adapter Installation and Administration Guide
Changing configuration settings using Configuration Manager Standard 2.1
Configuring the RLC connection information
To change the RLC connection information:
1 Complete the fields of the RLC Connection property sheet as described in
“RLC connection configuration” on page 129.
2 Click on the OK button to save the information in the temporary work file.
3 Click on the Send button to update the Digital Telephone IP Adapter unit
with the new information.
IF you are THEN
logged on to the Digital
Telephone IP Adapter unit,
the changes are written into the Digital
Telephone IP Adapter unit’s buffer.
To save the changes in Flash memory,
choose Upload/Download
→ Save to Flash.
not logged on to the Digital
Telephone IP Adapter unit,
the Configuration Manager dialog box
displays, similar to the following:
Do one of the following:
a. Log on to the Digital Telephone IP
Adapter unit, then click on the Send
button again.
b. Save the changes to a file on your
administration PC.