Filter
Top Products
76 Digital Telephone IP Adapter Installation and Administration Guide
Installing the Digital Telephone IP Adapter unit Standard 2.1
Installing the Digital Telephone External
IP Adapter unit
You can install the Digital Telephone External IP Adapter unit on a desk or on
the wall. The unit has the following dimensions:
! 18.2 cm (7.2 inches) wide
! 9.9 cm (3.9 inches) deep
! 2.544 cm (1 inch) high
Note: If you want to mount the Digital Telephone External IP Adapter unit on
the wall, you must provide your own mounting hardware.
Installing the Digital Telephone External IP Adapter unit on a desk
To install the Digital Telephone External IP Adapter unit on a desk:
1 Turn the Digital Telephone External IP Adapter unit upside down.
2 Affix the rubber feet to the bottom of the Digital Telephone External IP
Adapter unit.
Note: Ensure the rubber feet are securely fastened.
3 Place the Digital Telephone External IP Adapter unit in the desired location.
Installing the Digital Telephone External IP Adapter unit on the wall
You need the following tools:
! a tape measure
! a screwdriver
! two long screws (to ensure the unit is securely mounted)
Note: Do not affix the rubber feet to the bottom of the Digital Telephone
External IP Adapter unit. Otherwise, the unit cannot be mounted flush against
the wall.