Filter
Top Products
Digital Telephone IP Adapter Installation and Administration Guide 69
January 2005 Installing the Digital Telephone IP Adapter unit
Required hardware and software tools
You need the following tools for hardware and software installation:
! antistatic ESD wrist strap (recommended)
! Phillips-head screwdriver and two number eight wood screws (if you want
to mount the Digital Telephone External IP Adapter on the wall)
! Remote Gateway 9100 Series Product CD-ROM
! PC with a CD-ROM drive or an Internet connection for obtaining software,
firmware, and documentation updates
! TFTP server application installed on the PC
The TFTP server is required for performing firmware upgrades. If a TFTP
server is currently not installed, you can obtain one from the Internet.
Unpacking and inspecting the equipment
Before you install the Digital Telephone IP Adapter unit, ensure that the
following package contents are all present and are not damaged:
! one Digital Telephone Internal IP Adapter or Digital Telephone External IP
Adapter
! one power cord and power supply for each Digital Telephone IP Adapter
unit
! one six-foot RJ-11 telephone cable for each Digital Telephone External IP
Adapter unit
! one installation kit for each Digital Telephone Internal IP Adapter circuit
card. Each installation kit includes the following:
— two ferrite beads
—one overlay
— two mounting screws (used to attach the circuit card to the foot stand)
! Remote Gateway 9100 Series and RLC Release Notes (NTP 555-8421-102)
! Digital Telephone IP Adapter Quick Start Guide