Filter
Top Products
Digital Telephone IP Adapter Installation and Administration Guide 199
January 2005 Administration
3 Click on the Browse button.
Result: The Open dialog box displays, similar to the following:
4 Ensure the Files of type drop down box shows Upgrade Files (*.UPG).
5 Navigate to the folder where the firmware file is located.
6 Select the file, and then click on the Open button.
Example: For Digital Telephone IP Adapter unit firmware, select
IPAdapter.upg, and click on the Open button.
Result: The Software Upload dialog box reappears. The file you selected is
shown in the Uploaded File box.
7 Click on the Upload button.
Wait until the file uploads completely before entering any other commands.
The Log Report window displays a confirmation message when the
upgrade is completed.
Note: Configuration Manager prompts you to restart the
Digital Telephone
IP Adapter unit
after upgrading the firmware. To do this, follow the
procedure on page 204.