Filter
Top Products
224 Digital Telephone IP Adapter Installation and Administration Guide
Troubleshooting Standard 2.1
Syslog testing
Once you configure the syslog feature and save it to Flash, use the Syslog test
command to test the configuration. The Remote Gateway 9100 Series system
generates test syslog messages. This allows you to verify the syslog
configuration as well as the syslog collector functionality on the syslog
server(s).
Getting there 911x → Configuration Manager
Performing syslog testing
To perform syslog testing:
1 From the Menu Bar, choose Tests → Syslog.
Result: A message displays, similar to the following:
2 Click on the OK button.
3 Examine the syslog server(s) to see if the test was successful.