Filter
Top Products
NN10265-111 MCS 5100 3.5 Standard 4.0 January 2006
44
Copyright © Nortel Networks Limited 2006
Deploying the RTP Media Portal server
For information regarding how to deploy and configure an RTP Media
Portal server, please refer to MCS 5100 System Management Console
User Guide (NN10273-111).
Adding the RTP Media Portal component
This procedure assumes that the server on which the RTP Media Portal
will be deployed, has already been configured. For example, Figure 21,
Add from the pop-up menu, on page 44 shows the RTP Media Portal
component being deployed onto the previously configured RTP Media
Portal server.
From the System Management Console
1 In the System tree, right-click Components under the
appropriate RTP Media Portal server.
2 From the pop-up menu, select the Add > Component
command.
Figure 21 Add from the pop-up menu
Note: You may also launch the add command from the
pull-down Configuration menu.