Filter
Top Products
MCS 5100 RTP Media Portal Basics
73
Copyright © Nortel Networks Limited 2006
Figure 32 BIOS Setup: Boot Device Selection menu
7 Use Item Specific Help to disable all devices except the SCSI
CD-ROM drive. For each device to be disabled, use the arrow
keys to select the device, then type an exclamation mark (!) to
disable it.
8 Press the Esc key four times. Then press Enter when prompted
to save the configuration. The system will reboot from the
CD-ROM drive.
9 Insert the Linux Recovery CD into the RTP Media Portal
CD-ROM drive.
10 Press the reset button on the Linux server. This will cause the
Linux server to reboot from the recovery CD-ROM.
11 Log in as root, password rescue.
12 Verify that access to the tape server has been set correctly.
rsh -l sysadmin <Tape_Server_IP> df -k <Enter>
where <Tape_Server_IP> is the name of the remote tape server
host.
Output appears on screen, indicating the target system is
correctly set for the restore operation. In not, contact your next
line of support before continuing.
BIOS Setup Utility
Item Specific Help
Keys used to view or
configure devices:
<Enter> expands or
collapses devices w ith
a '+' or '-'
<Ctrl+Enter> expands
all
<!> enables or
disables a device.
<+> and <-> moves
the device up or down.
<n> m oves rem ovable
device between Hard
Disk and Removable Disk.
Main M em ory Advanced Security Status Boot
Boot
Exit
Boot Device Priority
Boot Device Priority
8XX SCSI CD-ROM LSI Logic
!+Hard Drive
!+Removable Devices
! ATAPI CD-RO M Drive
! Legacy Network Boot