Filter
Top Products
MCS 5100 RTP Media Portal Basics
89
Copyright © Nortel Networks Limited 2006
two interfaces on the host are used in an active, standby mode and
there is no interface redundancy on the media cards as each connects
to a separate network. This configuration is depicted in Figure 37 on
page 89.
Figure 37 Dual-network deployment
The below table details the usage of the physical port for dual-network
deployment.
Failure to use the ports as described will result in a non-operational
RTP Media Portal.
Label
BIOS device
number
Linux
interface name
Usage
MCPN 765 I/O Card Ethernet port usage
NET1 CLUN 0/DLUN 0 eth0 Public
NET2 CLUN 13/DLUN 0 eth1 MCS Service
CPV5370 Host Card Ethernet port usage
1 N/A eth0 MCS Service
2 N/A eth1 MCS Service
Host
Blade
Baystack 470
MCP Service
S
Unit
Unit
Medi
a
Blade
Medi
a
Blade
Media Portal
eth1
eth0
NET2
Public Subnet
NET1
NET2
NET1
Baystack 470