Filter
Top Products
Getting Started with the Contivity Extranet Switch 2500
4-6
Register Online
Click to register the Switch with Nortel Networks. It will only take a few minutes
and it will give you access to the latest software and technical tips. Your Switch
requires Internet access in order to register.
Logging in and Supplying a Password
Start up a Web browser and enter your Switch's Management IP Address. Select
an option in the navigational menu and submenu, and then you are prompted for
the Login and Password. Enter the system default Login and Password in
lowercase characters, as follows:
Login: admin
Password: setup
IMPORTANT: If you change your password and later need to access the Serial
Interface Configuration, you must then enter the modified password. The factory
default password is no longer valid in this case. Also, make sure you change the
default Administrator's Login and Password as soon as possible (refer to the
Admin→Administrator display). You should then guard the Login and Password
carefully.