Filter
Top Products
Getting Started with the Contivity Extranet Switch 2500
7-2
Removing the Top Cover
The following illustration shows you how to remove the top cover from the
Switch. You must remove the cover to:
• Install LAN or WAN cards.
• Install additional memory.
Figure 7-1. Removing the Top Cover
1.
Turn off the Switch’s power and unplug it.
2.
Remove the three screws at the top rear of the chassis.
3.
Slide the top cover back and move it away from the chassis.
Remove the three screws
from the top of the cover
1
Lift rear of cover up,
and pull away from unit.
2