Filter
Top Products
Changing Hardware Configurations
7-3
System Board
Figure 7-2 shows the Switch's system board, in particular the DIMMs, option
cards slots, and the cooling fan.
Figure 7-2. Switch's System Board
Warning:
Beware of danger if the battery is incorrectly replaced. Replace
with the same or an equivalent battery only, as recommended by the
manufacturer. Also, dispose of used batteries according the
manufacturer's instructions.
NOTE:
In spite of the above warning, which is mandated for regulatory
approval, y
ou should not change the battery
. If you suspect a dead
battery, contact Nortel Networks Customer Support.
4 Option Card Slots
Factory Installed
DIMMs (1, 2, or 4)
CPU
(only three are usable)
Cooling Fan
1
2
3
4
2
1
34