Filter
Top Products
Changing Hardware Configurations
7-7
Removing the Front Bezel
The following illustration shows you how to remove the front bezel from the
Switch. Note that you do not need to turn off the Switch to remove the front bezel.
You must remove the bezel to insert the Recovery Diskette.
Figure 7-5. Front Bezel Removal
Note that the first few times you remove the front bezel it might seem to resist
removal. This is simply because the pins and snaps are new. After a few times,
removal is easier. Sliding the top cover back is optional; it allows you to get a
better grip on the front bezel for removal.
Front Bezel
Slide fingers behind
front bezel and firmly
pull forward in the
direction of arrows.