Nortel Networks 4430 Network Card User Manual


 
Analog Voice ModulesPassport 4400 Hardware Installation Manual
6-6
Universal Analog Voice Module
The Universal Analog Voice Module (UAVM) consists of two channels into which
one of the four voice interface modules (E&M, FXO, FXS, or Voice/Fax Switch
module), is inserted. The Universal Analog Voice Module must be configured
with the correct jumper settings for the types of interface modules you plan to
use before you can connect the modules to the network. Voice interface modules
can be connected with either RJ-11 modular cables or with a direct connection
to a terminal block.
The Universal Analog Voice Module consists of a motherboard and one or two
interface modules (see Figure 6-9 below).
Figure 6-8. Rear View of Universal Analog Voice Module
Figure 6-9. Universal Analog Voice Module with Two Interface Modules Installed
Dual Channel Universal Analog Voice/Fax Module
FXS and FXO Interface Modules
E&M Interface Module
Voice/Fax Switch Module
Interface Module
Module Switch Group
(see Figure 10-1
on page 10-3)
Back Panel