Filter
Top Products
114 Chapter 5 Using MultiLink Trunking Manager
208963-B
Figure 48 Insert MLT dialog box — pair of devices selected
3 In the Id field for both nodes, select the same Id number for the MLT.
4 In one of the Name fields, type the name of the MLT.
The text you type appears in both Node Name fields.
5 In the Ports text box, select the ports to be added to the MLT.
In the Insert MLT dialog box, port numbers are highlighted in green to
indicate that the ports are already connected between the two devices.
Dimmed port numbers mean that those ports are inactive and cannot be
included in the MLT.
6 Select the MLT type option.
The default is Access.
7 Select the VLAN IDs for both nodes to be included in the MLT port.
8 Click Ok.
Table 35 describes the items in the Insert MLT dialog box for a pair of
devices.
Note: Both nodes must belong to the same VLAN ID list.