Filter
Top Products
Chapter 6 Using Multicast Manager 161
Using Optivity Switch Manager, Release 1.1.0.0
3 Return to the Optivity Switch Manager window.
— If a protocol icon was selected, all devices supported by the protocol are
highlighted.
— If a single device was selected, the device is highlighted.
Highlighting a multicast forwarding path
To highlight a multicast forwarding path from a source subnet to a multicast node
within a multicast group:
1 In the Multicast Manager navigation pane, select a forwarding node under a
multicast group and source subnet that you want to view, or select a source
subnet under a multicast group.
2 From Multicast Manager menu bar, choose View > Highlight Topology.
3 Return to the Optivity Switch Manager window.
— If a forwarding node was selected, the devices and a single forwarding
path are highlighted (Figure 78).
— If a source subnet folder was selected, the devices and all forwarding
paths coming out of a source are highlighted.