Filter
Top Products
(Revised 2010-11-15) Page 153 of 156
Appendix A. XML Settings File Example
<!-- Overview of XML settings for N-TRON switches -->
<!-- XML settings can be downloaded to a switch to configure the switch. XML settings cover a
subset of the settings available through a web browser. -->
<!-- There are several top level configuration sections. Each section is optional.
<SystemConfiguration>
<Switches/>
<Administration/>
<IPConfiguration/>
<Users/>
<Ports/>
<DHCPServer/>
<MACSecurity/>
</SystemConfiguration>
-->
<SystemConfiguration version="1" minSwVer="3.4.2">
<!-- The minSwVer attribute is optional. If present, the XML settings are ignored if the
switch software version does not meet the minimum version requirement -->
<!-- ______________________________________________________________________________________ -->
<!-- The Switches block is optional. If present, the model name of the target switch must
be in the list for the file to be processed. -->
<Switches>
<Switch minSwVer="3.2.10">708TX</Switch> <!-- If the minSwVer attribute is present, it
overrides the minSwVer attribute of
SystemConfiguration. -->
<Switch>7506GX2</Switch>
</Switches>
<!-- ______________________________________________________________________________________ -->
<!-- Administration -->
<Administration>
<SwitchName>myname</SwitchName> <!-- optional --><!--255 character limit-->
<SwitchLocation>mylocation</SwitchLocation><!-- optional --><!--255 character limit-->
<SwitchContact>mycontact</SwitchContact> <!-- optional --><!--255 character limit-->
</Administration>
<!-- ______________________________________________________________________________________ -->
<!-- IP configuration -->
<IPConfiguration>
<Mode>static OR dhcp</Mode> <!-- Mode must be static or dhcp -->
<!-- If dhcp mode, these elements are the "Fallback" Address, Subnet, and Gateway.
Note: For an IP address of 192.168.1.201, there is no fallback address. -->
<!-- All IP addresses have a 15 character limit (xxx.xxx.xxx.xxx) -->
<Address>192.168.1.222</Address> <!-- 15 character limit -->
<Subnet>255.255.255.0</Subnet> <!-- 15 character limit -->
<Gateway>192.168.1.1</Gateway> <!-- 15 character limit -->
<!-- If dhcp mode, this is the dhcp client id -->
<ClientID>
<!-- Use one of the elements (MACAddress, SwitchName, OtherText, OtherHex).
MACAddress and SwitchName use current switch values. -->
<MACAddress/>
<SwitchName/>
<OtherText>myClientID</OtherText> <!-- 255 character limit -->