Filter
Top Products
(Revised 2010-11-15) Page 35 of 156
DHCP – Server – Setup IP Maps, Continued…
The Static Range type of mapping is used to create a range of static IP addresses dedicated to specific ports
on a relay agent switch. There are two different data entry formats available according to whether the relay
agent type is for an N-TRON or for a generic switch.
To create a range of static IP addresses on an N-Tron relay agent switch:
Network Profile
An existing network profile to which the IP map applies.
Relay Agent Type
Should be set to N-TRON.
Switch Model
List of N-TRON models that support this feature.
Remote ID
A unique identifier that designates the N-TRON relay agent switch.
Add
Checkbox used to add an IP map for the corresponding port.
Port No
The actual port number.
Port Name
Descriptive name of the port.
VLAN
VLAN ID that the port is a member of.
Circuit ID
Auto-generated string based on the port name and VLAN ID.
IP Address
IP address to assign to the IP map.