N-Tron 708M12 Switch User Manual


 
(Revised 2010-11-15) Page 26 of 156
Administration System, Continued…
By selecting the Modify button from the ‗Static‘ mode, you will be able to change the switch‘s IP
Configuration, IP Address, Subnet Mask, Gateway, Name, Contact information, and the Location of the
switch through the web management features. It is recommended to change the TCP/IP information through
the Command Line Interface (CLI) initially, but it defaults to the following:
IP Configuration - Static
IP Address 192.168.1.201
Subnet Mask 255.255.255.0
Gateway 192.168.1.1