(Revised 2010-11-15) Page 155 of 156
<DomainName>N-TRON.com</DomainName> <!-- 63 character limit -->
<DNSServer1>192.168.2.10</DNSServer1>
<DNSServer2>192.168.2.11</DNSServer2>
<Gateway1>192.168.2.1</Gateway1>
<Gateway2>192.168.2.2</Gateway2>
</Advanced>
<IPMaps>
<!-- The DynamicRange is the only IP Map supported. You may have 0 or more. -->
<DynamicRange>
<!-- low and high within range of profile -->
<LowIP>192.168.2.1</LowIP> <!-- required -->
<HighIP>192.168.2.4</HighIP> <!-- required -->
</DynamicRange>
</IPMaps>
</Profile>
</DHCPServer>
<!-- ______________________________________________________________________________________ -->
<!-- MAC security -->
<MACSecurity>
<Mode>learning OR locked</Mode> <!-- Mode must be learning or locked -->
<!-- Authorized entries -->
<Authorized mode="keep or delete"> <!-- mode must be "keep" or "delete" -->
<!-- mode=delete - delete existing authorized MACs before adding
authorized MACs (default) -->
<!-- mode=keep - do not delete existing authorized MACs before
adding authorized MACs -->
<ValidatePorts>yes OR no</ValidatePorts> <!-- optional -->
<!-- Must be yes(default) or no.
If no, invalid ports are ignored. -->
<Entry>
<MACAddress>00:07:af:ff:5b:c0</MACAddress> <!-- 17 character limit -->
<!-- MAC is valid on all ports listed in the ports list.
If the ports list is missing, then the MAC is valid on all ports. -->
<Ports>
<Port>
<!-- Use PortNumber or PortName -->
<PortNumber>4</PortNumber> <!-- 1 to maximum port for switch -->
</Port>
<Port>
<PortName>TX5</PortName> <!-- Name of port on switch -->
</Port>
</Ports>
</Entry>
<Entry>
<MACAddress>0007af1d6460</MACAddress> <!-- Example of a MAC with no
delimiters, valid on all ports. -->
</Entry>
</Authorized>
</MACSecurity>
</SystemConfiguration>