Filter
Top Products
ES 1220n Menu Functions • 105
PCL Emulation Menu
Note: Factory default settings are shown in bold.
Item Settings Explanation
FONT
SOURCE
RESIDENT / DIMM0 /
DIMM1 / DOWNLOADED
Specifies the location of the
PCL default font. Change
the setting appropriately if
additional fonts are installed
in the expansion ROM slot
or additional fonts have
been downloaded to the
printer as permanent fonts.
FONT NO. I000 / C001 / S001 Sets the current default font
number from the currently
selected source:
I = internal (resident font);
I000 = Courier.
C = Font stored in the
printer's Flash memory.
S = downloaded soft font,
stored on the printer's
internal hard disk drive.
Applies only to printers with
the optional hard disk drive
installed.
FONT PITCH 0.44 to 99.99 CPI
Default = 10.00 CPI
Sets the character width of
the default font in characters
per inch (CPI). This is only
available when the selected
font is fixed width and
scalable.