Filter
Top Products
ML790/791 Printer Handbook 101
This appendix contains the commands for the IBM X24e/ XL24e Proprinter and X24e
AGM/ XL24e AGM emulations, grouped by function.
Normally the commands in this table override Menu settings. Except as noted,
these commands are cancelled and the printer returns to factory and Menu
settings when the printer receives an Initialization, Software I-Prime, or
Change Emulation command, or when it is turned off and then on again.
A
ppendix D: Commands–IBM Emulation
Horizontal Control
Carriage Return
Set Horizontal Tabs
Horizontal Tab
Reset Tabs to Default
ASCII: CR
Dec: 13
Hex: 0D
ASCII: ESC D n
1
n
2
··· n
k
NUL
Dec: 27 68 n
1
n
2
··· n
k
0
Hex: 1B 44 n
1
n
2
··· n
k
00
ASCII: HT
Dec: 9
Hex: 09
ASCII: ESC R
Dec: 27 82
Hex: 1B 52
IBM
Function
Commands
(ASCII, Decimal, Hexadecimal)
Prints data in buffer and performs car-
riage return.
Sets horizontal tab stop positions.
n=1 to 255: specifies position of tab stop
- maximum is number of characters per
line
k=1 to 28; n
1
=0: clear tabs
Default: every 8 columns
Move to next horizontal tab stop
Reset horizontal tabs for default: every
8th character. Also resets vertical tabs to
default of 1 line.
Notes