ML790/791 Printer Handbook 105
Set Form Length in Lines
Set Skip Over Perforation
Cancel Skip Over
Perforation
Set Top of Form
Cut Sheet Feeder
(Option)
Cut Sheet Feeder Control
ASCII: ESC C n
Dec: 27 67 n
Hex: 1B 43 n
ASCII: ESC N n
Dec: 27 78 n
Hex: 1B 4E n
ASCII: ESC O
Dec: 27 79
Hex: 1B 4F
ASCII: ESC 4
Dec: 27 52
Hex: 1B 34
ASCII: ESC EM n
Dec: 27 25 n
Hex: 1B 19 n
IBM
Function
Commands
(ASCII, Decimal, Hexadecimal)
Sets page length in lines, relative to cur-
rently selected line spacing, calculated
by multiplying value of n by line spac-
ing ratio.
n=1 to 255
This command cancels Skip Over Perfo-
ration setting.
Activates Skip Over Perforation feature
and sets it for n lines at the current line
spacing. When the printer reaches the
bottom of the page, it will skip n lines to
next top of form. Command overrides
menu.
n=1 to 255 lines
n=0: command ignored
Deactivates Skip Over Perforation.
Command override menu.
Sets top of form at current printhead po-
sition. Command ignored in CSF or Au-
to-Feed mode.
OKI unique command. Controls Cut
Sheet Feeder accessory.
n=1: Select bin 1
n=2: Select bin 2 (if present)
n=73 (ASCII "I" ): Insert sheet
n=82 (ASCII "R" ): Eject sheet
Notes