Filter
Top Products
32 – C330/C530 Menu Functions
How to Change the Settings: Users ____
It should be noted that many of these settings can be, and often
are, overridden by settings in the Windows printer drivers.
However, several of the driver settings can be left at “Printer
Setting”, which will then default to the settings entered in these
printer menus.
Where applicable, factory default settings are shown in bold type
in the following tables.
In the normal operating condition, known as “standby,” the
printer’s LCD window will show “Ready to Print”. In this condition,
to enter the menu system, press the up and down Menu buttons
on the operator panel to move up and down through the list of
menus until the menu you wish to view is displayed. Then proceed
as follows:
1.
Press
OK
to enter the menu.
2.
Use the
up
and
down
MENU
buttons on the control panel to
scroll through the menus. When the item you want to change
is displayed, press
OK
to view the sub-menus for that item.
3.
Use the
up
and
down
MENU buttons to move up and down
through the sub-menu items. When the item you want to
change is displayed press
OK
to display the setting.
4.
Use the
up
and
down
MENU buttons to move up and down
through the available settings for the sub-menu item. When
the item you want to change is displayed press
OK
to display
the setting. An asterisk (*) will appear next to the setting,
indicating that this setting is currently in effect.
5.
Do one of the following:
•Press
Back
again to move up to the list of menus;
or…
•Press
On Line
or
Cancel
to exit from the menu system and
return to standby.