Filter
Top Products
56 – C330/C530 Menu Functions
FRAME TYPE
AUTO
/
802.2 /
802.3 /
ETHER
-
NET II /
SNAP
Selects the Ethernet MAC layer frame type.
Display Condition: Netware should be
enabled.
IP ADDRESS
SET
AUTO
/
MANUAL
Specifies whether IP address allocation is
automatic (DHCP) or manually assigned.
IPV4
ADDRESS
xxx.xxx.x
xx.xxx
Current assigned IP address. To change,
press
OK
and use
Menu
buttons to incre-
ment 1st octet, then press
OK
again to
move on to next octet. When 4th octet has
been set, press
OK
again to register new
address.
SUBNET
MASK
xxx.xxx.x
xx.xxx
Current assigned subnet mask. To change,
proceed as above.
GATEWAY
ADDRESS
xxx.xxx.x
xx.xxx
Current assigned gateway address. To
change, proceed as above.
WEB
ENABLE
/
DISABLE
Enables or disables Web config. facility.
TELNET ENABLE /
DISABLE
Enables or disables Telnet config. facility.
FTP ENABLE /
DISABLE
Enables or disables communication via FTP.
IPSEC ENABLE /
DISABLE
Applies to C330 and C530 only.
Sets Enable/Disable of IPSec. Enable via the
web.
Enable: IPSec is available.
Disable: IPSec is not available.
SNMP
ENABLE
/
DIS-
ABLE
Enables or disables SNMP protocol.
ITEM ACTION EXPLANATION