Filter
Top Products
C6150 User’s Guide
131
NOTE
Warning! If the printer has been printing, the fuser
will be HOT!
If the sheet is well advanced into the fuser (only a
short length is still visible), do not attempt to pull
it back. See step 4 under “Jam 382” .
To remove a sheet trapped in the fuser:
1. Grasp the edge of the sheet.
2. Push the fuser pressure release lever (1)
towards the front and down.
3. Lift out the sheet.
4. Let go of the fuser pressure release lever.
c53_64_jambelt2.jpg