Filter
Top Products
C6150 User’s Guide
142
Lines, White (Vertical)
Shading on unprinted sections
Toner rubs off when you rub the printed surface.
Ultra Heavy
If the Ultra Heavy setting does not give proper toner fusion,
you can try the Label settings.
Remedy
Clean LED head with lens cleaner or soft tissue.
Change toner cartridge.
Change image drum.
Possible cause Remedy
Paper has been
affected by static
electricity.
Store paper within specified temperature and
humidity levels. See “Specifications” on
page 112.
Paper is too thick. Use recommended paper. See “Paper (Print
Media)” on page 16.
Toner is low. Replace toner cartridge. See “Replace a Toner
Cartridge” on page 65.
Possible cause Remedy
Media Weight and
Media Type settings
may not be
appropriate.
Set the value of media weight in the menu to
the next heaviest one (MEDIA MENU → YYY
MEDIA WEIGHT).
Packing materials were
left on the fuser when
it was installed.
Careful! Fuser my be HOT!
Open the top cover and check to be sure that
all the packing materials were removed from
the fuser. See “Replace the Fuser” on page 81.