Filter
Top Products
34 – C710n User’s Guide
Network
Setup
(cont.)
NetWare Enable
Disable
Sets Enable/Disable of NetWare
Protocol.
EtherTalk Enable
Disable
Sets Enable/Disable of
EtherTalk Protocol.
Frame
Type
Auto
802.2
802.3
Ethernet II
SNAP
Sets the frame type.
Netware should be enabled.
TypeIP
Address
Set
Auto
Manual
Sets the IP Address setting
method.
TCP/IP should be enabled.
IP Address xxx.xxx.xxx.xx
x
Sets the IP Address.
TCP/IP should be enabled.
Subnet
Mask
xxx.xxx.xxx.xx
x
Sets the Subnet Mask.
TCP/IP should be enabled.
Gateway
Address
xxx.xxx.xxx.xx
x
Sets the Gateway (default
router) address.
0.0.0.0 means that there is no
router.
TCP/IP should be enabled.
Web Enable
Disable
Sets Enable/Disable of Web.
Enable: Web/IPP is available.
Disable: Web/IPP is not
available.
TCP/IP should be enabled.
Telnet Enable
Disable
Sets Enable/Disable of Telnet.
Enable: Telnet is available.
Disable: Telnet is not available.
TCP/IP should be enabled.
ITEM SETTINGS EXPLANATION