Filter
Top Products
50 – C710n User’s Guide
Calibration
ITEM SETTI
NGS
EXPLANATION
Auto Density On/Off Enables/disables automatic
density adjustment.
Adjust
Density
Execute If Execute is selected, the
printer will immediately adjust
density and reflect it in TRC
compensation.
This adjustment must be
executed when the printer is
idling. It can become invalid
if executed in any other
state.
Adjust
Registration
Execute When this menu is selected, the
printer performs AutoAdjust
Registration.
This adjustment must be
executed when the printer is
idling.
Print Tuning
Pattern
Execute Prints the pattern for the user
to adjust TRC. Ordinarily, this
function is not needed because
TRC is automatically adjusted to
the recommended levels
through density adjustment and
TRC compensation.
Adjustment results will be
reflected as offset values
(addition) to the corrections
through the Adjust Density/TRC
Compensation function.