Filter
Top Products
Internet Fax 11
• SNMP - See the manual for the network card.
• Internet Fax - The settings explained above can be entered here in
addition to the following items, which are accessible only through the
web:
(a) SMTP Transmit: Whether or not to enable SMTP transmission
protocol. For normal operations, this setting should be left at
ENABLE.
(b) SMTP Receive: Whether or not to enable SMTP reception pro-
tocol. This should normally be set at ENABLE. If you do not
wish to receive by SMTP, change this setting to DISABLE.
Note: SMTP reception is used to forward incoming mail by FAX.
(c) POP3: Whether or not to enable POP reception protocol. For
normal operations, this setting should be left at ENABLE.
(d) SMTP port number: SMTP protocol port number. The default
setting is 25. Do not change it unless necessary.
(e) POP port number: POP protocol port number. The default set-
ting is 110. Do not change it unless necessary.
(f) Use APOP: Available when using a POP server that supports
APOP. With APOP, the POP password will be encrypted
before it is sent. If this setting is turned on when using a server,
which does not support APOP, it will cause a communication
error.
• Printer Menu (Paper and Trays, Timers and Alarms, Emulations) -
This menu will not be displayed for this fax machine. Even if the
printer menu is displayed, the settings cannot be changed.
Note: If any changes are implemented using a web browser, then the
user is requested to enter their username and password . The
default username is ROOT and the default pass word is the last
six digits of the MAC address for the network card. These set-
tings can be modified using Admin Manager.
Admin manager
Using Admin Manager, the network card can be configured through
Windows95/98/NT4.0 via the network. The settings available through
Admin Manager are mostly the same as those accessible through the web.
Also refer to the network card manual, which contains detailed informa-