Filter
Top Products
Internet Fax 3
Internet Fax
Internet fax settings
General
Before using Internet Fax, consult with the network administrator about
correct network settings.
There are two types of setting values for Internet Fax, which are as fol-
lows:
• Data stored on the fax machine.
• Data recorded on the network card.
To print out a list of the setting values on the fax machine, using the con-
trol panel of the fax machine, select MENU, then select 9:REPORT
PRINT and then select 6:CONFIGURATION.
To print out the settings stored on the network interface card (NIC) or its
current status using the control panel of the fax machine, select MENU,
then select 9:REPORT PRINT and then select 9:NIC CONFIGURA-
TION. Alternatively, select MENU, then select 9:REPORT PRINT and
then select 10:NIC INFORMATION.
Alternatively, if the black push button on the NIC is pressed for 3 seconds
and released, a report similar to that obtained from the NIC INFORMA-
TION menu is printed out together with a NIC self-diagnostic report.
Note: If power is turned on on while pressing this button down, the
network card will initialise its settings.
Please refer to manual for the network card, supplied on the CD, in con-
junction with this guide as it explains how to use the network card. Please
note, however, that the descriptions in the NIC manual are based on where
the network card is installed in a LED printer and that operations
described in the manual may not apply to this Internet Fax. The network
card manual does not explain the functions of Internet Fax. The network
card settings explained in the manual for network print do apply to the fax
machine.