Filter
Top Products
Network Printing 31
Network Printing
Printing documents
To print documents on this fax machine via the LAN, the appropriate soft-
ware needs to be installed from the supplied CD-ROM and make the cor-
rect settings for the environment.
Note: When printing on transparencies, set the Media Type to Light,
use the manual feed method and set the machine output for face
up stacking. Refer to the user's guide for the fax machine for
these adjustments. The recommended transparency type is 3M
CG2300.
A brief description of each of the procedures required for supported oper-
ating systems follows.
To install network card utilities, it is recommend that to select the Quick
Setup option where it is available.
Note: The Hyper-W Printer driver supports only network printing.
Printing via the parallel port is not supported. Local printing
through the parallel port requires a different driver. For fur-
ther details, please enquire through an authorized supplier.
Procedure for supported operating systems
NetWare
Recommended procedure:
1. Install printer driver.
2. Install network card utility.
3. Configure network card.
The NetWare server has two modes; printer server mode and remote
printer mode. The network card supports either mode. Using NetWare
requires that the fax machine should be attached as a printer under Net-
Ware control. For detailed configuration, see the utilities manual on the
CD-ROM.