Filter
Top Products
Internet Fax 27
F040: POP protocol DELE command error
F050: POP protocol TOP command error
F900: Network card I/F error
F910: TCP/IP or SMTP/POP not supported or allowed by network
card
F920: Network card not ready; transmission request received while
network card is initialising (redial)
F931: E-mail cannot be received (invalid TIFF)
F932: E-mail cannot be received (other than invalid TIFF)
F940: Memory full
F941: No new mail found in manual reception
F942: Command time-out
F950: Server communication error
F980: Aborted
Note: For service codes F001 and F002, the number of pages in the
report will be left blank.
Transmission troubleshooting
Transmission fails; a communication error occurs.
• Are the IP ADDRESS, SubNetMask and Default Gateway settings
correct?
• Has the SMTP server been configured correctly?
• Has the host name been registered?
• If using DNS, is the DNS server address correct?
• Check to make sure that the server is not down.
• If DNS is ON, some servers may cause an error.
When one-touch key is pressed with an email address assigned, a warning
message appears on the LCD.
• Has an e-mail address been entered that has been assigned on this
machine?
LCD shows message "OPTION BOARD ERROR".
• A network card I/F error has occurred - turn the power off and on
again to recover.