Filter
Top Products
38 Control Panel and Configuration Menu
Turning Off the Memory RX Mode
1 Press the or key to select UTILITY, and then press the Enter key.
" For details on selecting a menu, refer to “General Procedure for Spec-
ifying Settings in the Utility Menu” on page 36.
2 Press the or key to select FAX RX OPERATION, and then press the
Enter key.
3 Check that MEMORY RX MODE is selected, and then press the Enter key.
4 Using the or keys, select OFF, and then press the Enter key.
The password input box appears.
" If no password was specified, memory reception mode is canceled.
5 Enter the password, and then press the Enter key.
Memory reception mode is canceled.
" If faxes are saved in memory, printing of the faxes begins.
Specifying Forwarding Settings
1 Press the or key to select UTILITY, and then press the Enter key.
" For details on selecting a menu, refer to “General Procedure for Spec-
ifying Settings in the Utility Menu” on page 36.
2 Press the or key to select FAX RX OPERATION, and then press the
Enter key.
3 Press the or key to select FORWARD, and then press the Enter key.
The FORWARD setting appears.
4 Press the or key to select ON or ON (PRINT), and then press the Enter
key.
5 Enter the destination, or select from the speed dial destinations.
" To select from the speed dial destinations, press the ADDRESS BOOK
key, type in the speed dial number, and then press the ENTER key.
" An e-mail address can also be specified.
6 Press the Enter key.
The forwarding settings are specified.