C3400n User’s Guide
69
System configuration menu
This menu adjusts general printer settings to suit the way you
prefer to work.
SYSTEM CONFIGURATION MENU
ITEMS SETTINGS EXPLANATION
STATUS PAGE
AUTO PRINT
ENABLED
DISABLED
Automatically prints status on power
up.
TIME TO POWER
SAVE MODE
5 MIN
15 MIN
30 MIN
60 MIN
240 MIN
Adjusts the idling time before the
printer automatically switches into
power saving mode. In this mode
power consumption is reduced to a
low level required to just keep the
printer operating and ready to
receive data. When a job is sent the
printer will require a warm-up time
of up to 1 minute before printing can
begin.
CLEAR ALARMS ON
JOB
When ON, non-critical warnings,
such as requests for a different
paper size, can be cleared by
pressing the ON LINE button. When
set to JOB, they are cleared when
the print job resumes.
MANUAL FEED
(Multi Purpose
Tray) TIMEOUT
OFF
30~90~300
SEC
Specifies how many seconds the
printer will wait for paper to be fed
in manual feed mode before
cancelling the job.
PRINT TIMEOUT OFF
5~90~300
Specifies how many seconds the
printer will wait when received data
pauses before forcing a page eject.
PRINT
CONTINUATION
AT TONER
SHORTAGE
(LOW TONER)
CONTINUE
CANCEL
Specifies whether the printer should
continue printing even after a low
toner condition is detected.
JAM RECOVERY ON
OFF
Specifies whether the printer should
perform jam recovery after a paper
jam has occurred. If ON, the printer
will attempt to print again any pages
lost due to a paper jam once the jam
has been cleared.
ERROR REPORT ON
OFF
Specifies whether to print an error
report when an internal error occurs.