Filter
Top Products
C3400n User’s Guide
98
8. Identify the RAM expansion slot in the printer. Unclip the plastic
cover to open this slot.
Memory slot_Fig1_34.jpg
9. If the RAM expansion slot already contains a memory upgrade
board, that board will have to be removed before you can install
the new one. To remove it proceed as follows, otherwise skip to
step 10.
(a) Identify the locking clips at each end of the RAM expansion
slot.
(b) Push the clips outward and back into the printer. The board
will pop out slightly.
(c) Grip the board firmly by its short edges and pull it out of the
slot.
(d) Place the removed memory board in the antistatic bag
which originally contained the new memory board.
10. Hold the new memory board by its short edges, so that the edge
connector faces in towards the RAM expansion slot, and the small
cutout is closer to the bottom of the printer.